From what I have found, the 2003 Jayco Designer 32 RLTS has a GVWR of 13,500 lbs. The tandem axles will have enough capacity to handle the GVWR but typically subtract the pin weight from the GVWR. I was unable to find the pin weight, but using 15-20% of your GVWR you probably have 5,200 lb or 6,000 lb axles with 6k being the more likely of the two.
I recommend checking out the axle tag on your existing axles to verify this information. The capacity is typically listed on the axle tag.... view full answer...
Yes, we do offer the correct replacement lens for the LED Trailer Clearance or Side Marker Light with Reflex Reflector part # 328-K-59LB as part # CE84VR. view full answer...
Atwood was sold to Dometic a few years back and replacement parts for older landing gear are scarce. We do still have Stromberg Carlson Landing Gear repair kit for the follow jack that will fit, part # LG-146060. For a lead jack repair kit use # LG-146059.
Since repair parts will eventually be unavailable for this landing gear I suggest you consider replacing the setup with a new one such as # RVLG-8HDL which is rated for 8K. A motor kit can be added using part # LC142178. view full answer...
To replace your VT00310R slide out motor you need the Lippert 18:1 Venture Actuator Slide-Out Motor # LC132682, which I confirmed is the correct replacement with my contact at Lippert. view full answer...
I have a solution for you, but the 8100TR model number was in a lot of the older Fan-tastic Create-A-Breeze vents, which have since been discontinued. You can use Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans part # FVK8017-00 you were looking at, which is designed to replace the bow tie bracket, fan blades and motor.
The motor alone is not available but this is a great upgrade to the old motors since many customers have said this replacement is less squeaky compared... view full answer...